Add Location-Based Conditions

Use this task to create location based conditions.

  1. Select Policies > Conditions.
  2. Select Add Condition and configure the settings.
    Table 1. Location-Based Conditions Settings
    Field Descriptions
    Condition Name Enter at least three alphanumeric characters.
    Description (Optional) Enter a description of the condition.
    User Geographic Location(s) (Optional) Select one or more geographic locations from the drop-down list.
    Note: Geographic Location conditions are only applicable to Application Based Policies.
    Network Location (Optional) Select one of the following:

    If you select Site, select the existing sites from the drop-down list.

    • SSID - select the existing SSID from the drop-down list. Only SSIDs that are currently managed in the Network Resources > SSID view are listed.
    • Sites - select a site from the drop-down list.
    • Access Point - select the existing APs from the drop-down list.
    • Access Point & SSID - select the existing SSIDs and AP from the associated drop-down lists.
    • Switch - select the existing switches from the drop-down list.
  3. Select Add.
  4. To update or remove and existing location-based condition, select Elipses and select Update or Remove from the drop-down list.

Your location condition displays in the list.

9039102-00 Rev AA